Home / Wheel Loaders / Case Wheel Loaders / Case 821G |
Case 821G Specifications
The Case 821G wheel loader is powered by 411 cu.in (6.7L) FPT F4H FE613S six-cylinder turbocharged liquid-cooled diesel engine with a rated power of 178 hp (133 kW) at 2000 rpm. The Case 821G is equipped with a 4-speed autoshift transmission, power steering system, hydraulic wet disc brakes, and 23.5R25 standard tires. The closed center hydraulic system has two piston pumps with fluid flow rate of 31.6 gpm (120 lpm) and 31.6 gpm (120 lpm). The wheel loader has a rated operating capacity of 16790 lbs (7615 kg) and tipping load of 33580 lbs (15230 kg). The max lift height is 162.2 inches (4120 mm) to hinge pin, and breakout force is 40610 lbs (18420 kg).
Engine Specs |
Engine Model .................... FPT F4H FE613S
Engine Type .................... 4-cycle 6-cylinder liquid-cooled diesel
Number of Cylinders .................... Six, in-line
Displacement, cu.in (L) .................... 411 (6.70)
Cylinder Bore, in (mm) .................... 4.09 (104.0)
Piston Stroke, in (mm) .................... 5.19 (132.0)
Aspiration Type .................... Turbocharged and air-to-air cooled
Rated Engine Power, hp (kW) .................... 178.0 (133.0)
Rated Engine Speed, rpm .................... 2000
Maximum Torque, Nm (lb-ft) .................... 971 (716)
Torque Speed, rpm .................... 1300
Compression Ratio .................... 17.5:1
Firing Order .................... 1-5-3-6-2-4
Fuel System .................... Electronic
Injection System .................... Direct injection
Lubricating System .................... Forced lubrication
Oil Filter Type .................... Full-flow spin-on cartridge
Cooling System .................... Liquid-cooled
Air Cleaner Type .................... Double dry element
Emission Level .................... Tier 4 Final
Fuel Tank Capacity, gal (L) .................... 76.0 (288.0)
Oil Capacity, qts (L) .................... 16.0 (15.1)
Coolant Capacity, qts (L) .................... 31.5 (30.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 120
Standard Transmission |
Transmission Type .................... Autoshift or Manual
shift with Electronic Control Module
Gearbox Type .................... 4F/3R
Number of Forward Gears .................... 4
Number of Reverse Gears .................... 3
Torque Converter Type .................... Single stage
Torque Converter Ratio .................... 2.28:1
Oil Capacity, gal (L) .................... 9.0 (34.1)
Maximum Forward Speed, mph (kph) .................... 22.8 (36.6)
Maximum Reverse Speed, mph (kph) .................... 15.2 (24.4)
Optional Transmission |
Transmission Type .................... Autoshift or Manual
shift with Electronic Control Module
Gearbox Type .................... 5F/3R
Number of Forward Gears .................... 5
Number of Reverse Gears .................... 3
Torque Converter Type .................... Single stage
Torque Converter Ratio .................... 2.42:1
Oil Capacity, gal (L) .................... 9.0 (34.1)
Maximum Forward Speed, mph (kph) .................... 24.9 (40.0)
Maximum Reverse Speed, mph (kph) .................... 17.2 (27.7)
Wheels and Tires |
Drive System Type .................... Four-wheel drive (4WD)
Steering Configuration .................... Articulated frame
Steering System .................... Power steering
Service Brakes Type .................... Hydraulic multiple wet disc
Front Tire Size (Std) .................... 23.5R25
Rear Tire Size (Std) .................... 23.5R25
Front Tire Size (Opt) .................... 23.5x25
Rear Tire Size (Opt) .................... 23.5x25
Hydraulic System |
Hydraulic System Type .................... Closed center
Hydraulic Pump Type .................... Tandem, piston
Pump 1 Capacity, gpm (Lpm) .................... 31.6 (120.0)
Pump 2 Capacity, gpm (Lpm) .................... 31.6 (120.0)
System Pressure, psi (Bar) .................... 3625 (250)
Hydraulic Tank Capacity, gal (L) .................... 24.0 (90.8)
Hydraulic System Capacity, gal (L) .................... 47.0 (178.0)
Loader Performance |
Rated Operating Capacity (Straight), lbs (kg) .................... 16790 (7615)
Rated Operating Capacity (Full Turn), lbs (kg) .................... 14655 (6645)
Tipping Load (Straight), lbs (kg) .................... 33580 (15230)
Tipping Load (Full Turn), lbs (kg) .................... 29310 (13290)
Lift Capacity, lbs (kg) .................... 22335 (10130)
Breakout Force, lbs (kg) .................... 40610 (18420)
Dimensions and Weight |
Maximum Operating Height .................... 209.5 (5320)
Maximum Lift Height To Hinge Pin, in (mm) .................... 162.2 (4120)
Height To Top Of Cab, in (mm) .................... 136.2 (3460)
Length With Bucket On Ground, in (mm) .................... 308.4 (7835)
Width (Tread Center), in (mm) .................... 87.8 (2230)
Width (Over Tires), in (mm) .................... 111.4 (2830)
Wheel Base, in (mm) .................... 131.5 (3340)
Ground Clearance, in (mm) .................... 17 (430)
Articulation Angle, deg .................... 40
Bucket Width, in (mm) .................... 119 (3020)
Bucket Capacity, cu.ft (m3) .................... 95.3 (2.70)
Digging Depth, in (mm) .................... 2.5 (63)
Dump Angle At Full Height, deg .................... 55
Rollback Angle At Full Height, deg .................... 59
Rollback Angle At Ground, deg .................... 41
Clearance With Bucket Dumped, in (mm) .................... 121.8 (3095)
Reach At Full Height, in (mm) .................... 38.9 (990)
Turning Radius (w/Bucket), in (m) .................... 259.7 (6.6)
Operating Weight, lbs (kg) .................... 39725 (18020)
____________________________________________________________________________________
WHEEL LOADERS SPECIFICATIONS |
Bobcat
Caterpillar
Case
Doosan
John Deere
Kubota