____________________________________________________________________________________

Home / Wheel Loaders / Bobcat Wheel Loaders / Bobcat AL440

Bobcat AL440 Specifications

The Bobcat AL440 articulated wheel loader is powered by 203.2 cu.in (3.1L) Kubota V3300-DI-T 4-cylinder direct injection turbocharged diesel engine with a rated power of 82.1 hp (61.2 kW) at 2200 rpm. The Bobcat AL440 is equipped with a two-range hydrostatic transmission, power steering system, hydraulic drum brakes, and 365/80R20 tires. The hydraulic system has a pump with fluid flow rate of 19 gpm (72 lpm). The hydraulic pressure is 3625 psi (250 bar). The wheel loader has a rated operating capacity of 4290 lbs (1950 kg) and tipping load of 8580 lbs (3900 kg). The max lift height is 132.6" (3370 mm) to hinge pin, and breakout force is 13680 lbs (6220 kg).

Engine Specs

Engine Model .................... Kubota V3300-DI-T
Engine Type .................... Vertical liquid-cooled 4-cylinder diesel
Number of Cylinders .................... Four
Displacement, cu.in (L) .................... 203.2 (3.31)
Cylinder Bore, in (mm) .................... 3.86 (98.0)
Piston Stroke, in (mm) .................... 4.33 (110.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, hp (kW) .................... 82.1 (61.2)
Rated Engine Speed, rpm .................... 2200
Maximum Torque, Nm (lb-ft) .................... 296.4 (220)
Torque Speed, rpm .................... 1400
Idle Speed, rpm .................... 1250-2650
Compression Ratio .................... 22.6:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct injection
Lubricating System .................... Pressure lubrication by gear pump
Cooling System .................... Forced circulation with water pump
Emission Level .................... Tier 3 Final
Fuel Tank Capacity, gal (L) .................... 29 (110.0)
Oil Capacity, qts (L) .................... 14.0 (13.2)
Coolant Capacity, qts (L) .................... 17.2 (16.3)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 90

Transmission

Transmission Type .................... Hydrostatic
Number of Forward Gears .................... 2
Number of Reverse Gears .................... 2
Forward Speed (Std), mph (kph) .................... 12.5 (20.0)
Reverse Speed (Std), mph (kph) .................... 12.5 (20.0)
Forward Speed (Hi-Speed), mph (kph) .................... 22.5 (36.0)
Reverse Speed (Hi-Speed), mph (kph) .................... 22.5 (36.0)

Wheels and Tires

Drive System Type .................... Four-wheel drive (4WD)
Steering Configuration .................... Articulated frame
Steering System .................... Hydrostatic power
Brakes Type .................... Hydraulic drum
Front Tire Size (Std) .................... 365/80R20
Rear Tire Size (Std) .................... 365/80R20
Front Tire Size (Opt) .................... 335/80R20
Rear Tire Size (Opt) .................... 335/80R20

Hydraulic System

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Capacity, gpm (Lpm) .................... 19 (72.0)
System Pressure, psi (Bar) .................... 3625 (250)
Hydraulic Reservoir Capacity, gal (L) .................... 16.4 (62.0)
Hydraulic System Capacity, gal (L) .................... 23.2 (88.0)
Number of Control Valves .................... 3

Loader Performance

Rated Operating Capacity (Straight), lbs (kg) .................... 4840 (2200)
Rated Operating Capacity (Full Turn), lbs (kg) .................... 4290 (1950)
Tipping Load (Straight), lbs (kg) .................... 9680 (4400)
Tipping Load (Full Turn), lbs (kg) .................... 8580 (3900)
Lift Capacity, lbs (kg) .................... 12340 (5610)
Breakout Force, lbs (kg) .................... 13680 (6220)

Dimensions and Weight

Maximum Lift Height (Bucket Hinge Pin), in (mm) .................... 132.6 (3370)
Maximum Lift Height (Forks), in (mm) .................... 126.4 (3210)
Height To Top Of Cab, in (mm) .................... 108.8 (2765)
Length With Bucket On Ground, in (mm) .................... 209 (5310)
Length With Forks On Ground, in (mm) .................... 229.3 (5825)
Width (Tread Center), in (mm) .................... 59.4 (1510)
Width (Over Tires), in (mm) .................... 73 (1850)
Wheel Base, in (mm) .................... 87.4 (2220)
Ground Clearance, in (mm) .................... 18.1 (460)
Departure Angle, deg .................... 38
Articulation Angle, deg .................... 40
Working Width (Bucket), in (mm) .................... 77 (1950)
Heaped Capacity (Bucket), cu.ft (m3) .................... 35.2 (1.00)
Digging Depth (Bucket), in (mm) .................... 3.9 (100)
Rollback Angle At Ground (Bucket), deg .................... 50
Dump Angle At Full Height (Bucket), deg .................... 45
Dumping Height (Bucket), in (mm) .................... 103.7 (2635)
Reach At Full Height (Bucket Dumped), in (mm) .................... 27.9 (710)
Working Length (Forks), in (mm) .................... 35.4 (900)
Digging Depth (Forks), in (mm) .................... 3.5 (90)
Clearance At Max Reach (Forks), in (mm) .................... 57.3 (1455)
Maximum Reach (Forks), in (mm) .................... 53.1 (1350)
Reach At Full Height (Forks), in (mm) .................... 16.1 (410)
Reach At Ground Level (Forks), in (mm) .................... 26.4 (670)
Turning Radius (w/Bucket), in (mm) .................... 175 (4445)
Turning Radius (Inside Tires), in (mm) .................... 84.8 (2155)
Operating Weight, lbs (kg) .................... 12540 (5700)

____________________________________________________________________________________

WHEEL LOADERS SPECIFICATIONS

Bobcat

Caterpillar

Case

Doosan

John Deere

Kubota