• All Manufacturers

  • Bobcat
  • Case
  • Caterpillar
  • Doosan
  • John Deere
  • Kubota

  Wheel Loaders

  • Bobcat L28
  • Cat 926M
  • Case 221D
  • John Deere 304H
  • Doosan DL280-7
  • Case 521E
  • Kubota R070
  • John Deere 624J

Bobcat AL275 Specifications

The Bobcat AL275 articulated wheel loader is powered by 148.5 cu.in (2.4L) Kubota V2403-M-DI 4-cylinder direct injection diesel engine with a rated power of 48.1 hp (35.9 kW) at 2600 rpm. The Bobcat AL275 is equipped with a 2-range hydrostatic transmission, power steering system, hydraulic drum brakes, and 365/70R18 standard tires. The hydraulic system has a pump with fluid flow rate of 10.8 gpm (41 lpm). The hydraulic pressure is 3625 psi (250 bar). The wheel loader has a rated operating capacity of 2725 lbs (1240 kg) and tipping load of 5450 lbs (2480 kg). The maximum lift height is 122.8" (3120 mm) to hinge pin, and breakout force is 8295 lbs (3770 kg).

Engine Model .................... Kubota V2403-M-DI
Engine Type .................... 4-cycle vertical direct injection diesel
Number of Cylinders .................... 4
Total Displacement, cu in (L) .................... 148.5 (2.43)
Cylinder Bore, in (mm) .................... 3.43 (87.0)
Piston Stroke, in (mm) .................... 4.03 (102.4)
Aspiration Type .................... Naturally aspirated
Rated Engine Power, hp (kW) .................... 48.1 (35.9)
Rated Engine Speed, rpm .................... 2600
Low Idle Speed, rpm .................... 1075-1225
High Idle Speed, rpm .................... 2650-2800
Maximum Torque, Nm (lb-ft) .................... 162 (120)
Torque Speed, rpm .................... 1700
Compression Ratio .................... 23.8:1
Firing Order .................... 1-3-4-2
Fuel System .................... Common rail direct injection
Fuel System Control .................... Electronic
Lubricating system .................... Forced lubrication by pump
Cooling System .................... Forced circulation with water pump
Emission Level .................... Tier 3 Final
Fuel Tank Capacity, gal (L) .................... 19.8 (75.0)
Oil Capacity, qts (L) .................... 9.5 (9.0)
Coolant Capacity, qts (L) .................... 12.0 (11.3)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 90

Transmission Type .................... Hydrostatic
Number of Forward Gears .................... 2
Number of Reverse Gears .................... 2
Forward Speed (Std), mph (kph) .................... 12.5 (20.0)
Reverse Speed (Std), mph (kph) .................... 12.5 (20.0)
Forward Speed (Hi-Speed), mph (kph) .................... 22.5 (36.0)
Reverse Speed (Hi-Speed), mph (kph) .................... 22.5 (36.0)

Drive System Type .................... Four-wheel drive (4WD)
Steering Configuration .................... Articulated frame
Steering System .................... Hydrostatic power
Brakes Type .................... Hydraulic drum
Front Tire Size (Std) .................... 365/70R18
Rear Tire Size (Std) .................... 365/70R18
Front Tire Size (Opt) .................... 335/80R18
Rear Tire Size (Opt) .................... 335/80R18

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Capacity, gpm (Lpm) .................... 10.8 (41.0)
System Pressure, psi (Bar) .................... 3625 (250)
Hydraulic Reservoir Capacity, gal (L) .................... 10.6 (40.0)
Hydraulic System Capacity, gal (L) .................... 12.9 (49.0)
Number of Control Valves .................... 3

Rated Operating Capacity (Straight), lbs (kg) .................... 3025 (1375)
Rated Operating Capacity (Full Turn), lbs (kg) .................... 2725 (1240)
Tipping Load (Straight), lbs (kg) .................... 6050 (2750)
Tipping Load (Full Turn), lbs (kg) .................... 5450 (2480)
Lift Capacity, lbs (kg) .................... 7400 (3365)
Breakout Force, lbs (kg) .................... 8295 (3770)

Maximum Lift Height (Bucket Hinge Pin), in (mm) .................... 122.8 (3120)
Maximum Lift Height (Forks), in (mm) .................... 116.1 (2950)
Height To Top Of Cab, in (mm) .................... 102.7 (2610)
Length With Bucket On Ground, in (mm) .................... 188.2 (4780)
Length With Forks On Ground, in (mm) .................... 203.5 (5170)
Width (Tread Center), in (mm) .................... 52.4 (1330)
Width (Over Tires), in (mm) .................... 66.9 (1700)
Wheel Base, in (mm) .................... 76.8 (1950)
Ground Clearance, in (mm) .................... 16.1 (410)
Departure Angle, deg .................... 35
Articulation Angle, deg .................... 40
Working Width (Bucket), in (mm) .................... 67 (1700)
Heaped Capacity (Bucket), cu.ft (m3) .................... 22.9 (0.65)
Digging Depth (Bucket), in (mm) .................... 2.8 (70)
Rollback Angle At Ground (Bucket), deg .................... 50
Dump Angle At Full Height (Bucket), deg .................... 45
Dumping Height (Bucket), in (mm) .................... 99 (2515)
Reach At Full Height (Bucket Dumped), in (mm) .................... 22.8 (580)
Working Length (Forks), in (mm) .................... 35.4 (900)
Digging Depth (Forks), in (mm) .................... 3 (75)
Clearance At Max Reach (Forks), in (mm) .................... 51.4 (1305)
Maximum Reach (Forks), in (mm) .................... 48.4 (1230)
Reach At Full Height (Forks), in (mm) .................... 13.2 (335)
Reach At Ground Level (Forks), in (mm) .................... 26 (660)
Turning Radius (w/Bucket), in (mm) .................... 152.4 (3870)
Turning Radius (Inside Tires), in (mm) .................... 72 (1830)
Operating Weight, lbs (kg) .................... 8580 (3900)

____________________________________________________________________________________

Wheel Loaders, Skid Steers, and Compact Track Loaders